Custom Furniture in Dhaka: Wardrobes, Kitchen Cabinets and Office Furniture from Our Own Workshop
Custom furniture lets us plan storage, clearances and service points around your room. We specify boards, finishes and hardware for the intended use and moisture exposure. Furniture design in Bangladesh has one extra constraint that imported catalogues ignore: humidity, and the hardware that survives it. We design and fabricate custom furniture in Bangladesh from our own factory in Badda, Dhaka, built around your dimensions and daily use. Our design office is in Adabor and the workshop is in Badda, so drawings and production stay under the same team.

Every piece is designed around actual room dimensions, daily use, material choice, hardware and installation conditions, then fabricated by our own production team. For hinges, drawer channels and lift-up fittings we prefer branded hardware from manufacturers like Häfele when the budget allows, because the fittings decide how a cabinet feels after years of daily use. Studio Archifiction has produced custom furniture for offices, government workspaces and family homes across Dhaka since 2012.
Cabinet work is priced per sft of cabinet face. Our August 2026 rates run from BDT 1,800 per sft for gorjon ply with a colour finish to BDT 3,500 per sft for aluminium units with glass shelves; the full table by board and finish is in our kitchen cabinet price guide for Bangladesh.
| Board and finish | BDT per sft |
|---|---|
| 18 mm gorjon ply, colour finish | 1,800 to 2,000 |
| HPL or duco | 2,200 to 2,400 |
| Acrylic on gorjon ply | 2,400 to 2,500 |
| Acrylic on marine ply | 2,800 |
| Aluminium units with glass shelves | 3,500 |
Office and Home Furniture We Produce
Workstations and storage walls for offices, wardrobes and kitchen cabinets for homes.
Office Furniture: Workstations, Storage and Meeting Tables
Custom office furniture in Dhaka is where most of our workshop time goes: workstations with proper cable management and power grommets, executive tables paired with matching storage walls, conference tables and full meeting room furniture, reception counters and feature partitions, and storage cabinets and shelving built for high-traffic office use.
Office furniture in Dhaka is usually bought from a catalogue and then made to fit the room. We work the other way round. The room is planned first, then the furniture is drawn to the set-out, so sockets land where desks actually are and nothing is trimmed on site to make it fit.
On the 5,600 sft UNDP floor at IDB Bhaban we designed and supplied six-person workstation tables, overhead storage, meeting tables and a custom reception desk design matched to the brand wall as part of the renovation. For clinics we make the reception counter and the storage around each treatment room, as in our doctor’s chamber interior design for a dental practice in Gulshan. On the 750 sft ADB Wing meeting room the conference table was supplied to suit the room once the layout was fixed. Conference table price in Bangladesh depends on size, top material, edge detail and cable hardware; we quote from shop drawings, not a catalogue page. Sizing rules for meeting and conference tables are set out in our conference room design guide.
Home Furniture: Wardrobe Design in Dhaka, Kitchen Cabinets and TV Units
Wardrobes and bedroom storage systems, kitchen cabinets and utility cabinets, TV units and wall cabinet systems, and study tables, display units and sideboards, all sized to fit your actual rooms rather than a standard catalogue size. Wardrobe design requests usually decide the rest of the bedroom wall, so we draw the wardrobe and the wall as one elevation, the way the kitchen cabinet guide does for kitchens.

Made in Our Own Badda Factory
Every piece is fabricated in our own custom furniture workshop in Dhaka, the Badda factory, under controlled conditions, rather than outsourced to a third-party workshop. That lets one team check dimensions, material samples and finish against the approved drawings, and stay accountable from drawing to delivery instead of fitting a showroom size to your space. We also stand behind the work: every piece of custom furniture we supply carries two years of after-service support. Tell us the item and send a photograph, and we review adjustments, repairs and parts under the terms stated in your quotation.
How Our Furniture Workflow Works
Measure, draw, make, install. One team from start to finish.
Measure Your Space
We visit your space to measure and confirm exactly how each piece will fit.
Shop Drawings and Samples
You review shop drawings and key material samples before we start fabrication, so there are no surprises.
Fabrication in Badda
Production happens in our own factory under controlled conditions.
Delivery and Installation
Installation is supervised by our own team, so alignment matches the approved drawings.
Furniture Planned With the Room, Not After It
Custom furniture works best when it is planned with the room. See how it fits into a full office interior design scope or a residential interior project, where the same team coordinates layout, electrical points and installation.
Furniture in Use
Installed furniture and joinery from our projects: an office workstation, a home kitchen and a bedroom wardrobe. Each caption names the project it was made for.
Installed
Installed
InstalledFrequently Asked Questions
Ordering, sizes, pricing, boards and after-service.
Can I order custom furniture without a full interior design project?
Yes. You can commission custom furniture, such as kitchen cabinets, wardrobes or office pieces, on its own, without a full interior design engagement. We’ll still measure your space and confirm shop drawings before fabrication.
Do you build kitchen cabinets and wardrobes to fit non-standard room sizes?
That’s exactly what custom fabrication is for. We measure your actual wall widths, ceiling heights, and corners, and design cabinets and wardrobes to fit them precisely, instead of forcing standard sizes into an irregular room.
Where is your furniture fabricated?
In our own factory in Badda, Dhaka. Producing in-house lets our design and production teams check dimensions, material samples and finish details against the approved shop drawings before installation.
How much does custom furniture cost in Dhaka?
Built-in furniture is priced per sft of cabinet face, by board and finish. In August 2026 our kitchen cabinet rates run from BDT 1,800 to 2,000 per sft for 18 mm gorjon ply with a colour finish, BDT 2,200 to 2,400 for HPL or duco, BDT 2,400 to 2,500 for acrylic on gorjon ply, BDT 2,800 for acrylic on marine ply and BDT 3,500 for aluminium units with glass shelves. Wardrobes and storage walls are priced the same way. Loose pieces such as tables and workstations are quoted per piece against shop drawings. Counter tops, appliances and hardware upgrades are listed separately so you can see what you are paying for.
Which board should I choose for wardrobes and kitchen cabinets in Bangladesh?
Plywood or marine ply where water is constant, below the kitchen counter and around the sink. Gorjon ply with acrylic or HPL for wardrobes and upper cabinets, where finish matters more than moisture. PVC or WPC boards where water cannot be avoided. Spend on the hinges and drawer channels before you spend on the board: in a Dhaka kitchen the hardware fails first.
What after-service do you provide on custom furniture?
Two years of after-service support on every piece we supply. If a door drops, a drawer runner fails or an edge lifts, send the item details and a photograph and we review it. Adjustments, repairs, replacement parts and third-party hardware are handled under the terms stated in your quotation, so ask for them in writing before you sign.
Do you make custom reception counters?
Yes. We draw the counter together with the room plan, so the cable route, power points and storage are fixed before fabrication, and then build it in our own workshop in Badda. For clinics we also make the storage around each treatment room, as in our dental practice project in Gulshan. For office lobbies, see our office interior design work, or send us the lobby plan and the counter length you need.
Written by Architect Kazi Mohammad Alam Kaiser, Principal Architect, Studio Archifiction. Institute of Architects Bangladesh (IAB), member K-172. Service scope last reviewed 13 August 2026.
Ready to build furniture
that fits?
Send the room dimensions, reference photos and the pieces you need: workstations, wardrobes, kitchen cabinets, conference tables or storage walls. Our design team and Badda production setup will propose sizes, materials, hardware and a fabrication timeline.
Architect-led · Dhaka · Since 2012