Interior design cost in Bangladesh depends on three things: the work you need, the area being measured and the specification. This guide covers homes: what each published number includes, how to turn a rate into a budget for your flat, and how to compare two quotes fairly. Office fit-outs are priced on a different basis and have their own guide.

The short answer: interior design cost per square foot (sft) in 2026
Dhaka homes: BDT 1,500 to 3,000 per square foot (sft) of measured interior area, design and execution together. Minimal, Standard and Exclusive levels sit inside that range.
These are Studio Archifiction’s published references, not a national price survey. A quotation should state its date, location, area basis, included work, exclusions and tax treatment.

Start with the right price basis
Most budget confusion comes from comparing rates that measure different things. Check the basis first.
| Work | Published reference | How to read it |
|---|---|---|
| Home interior in Dhaka | BDT 1,500 to 3,000 per sft | Design and execution together for the agreed scope. Verified September 2026. |
| Interior design only | BDT 50 to 80 per sft; up to BDT 100 for a detailed or complex scope | Design and documentation fee. Confirm the measured area and deliverables in the proposal. |
| Kitchen cabinets | BDT 1,800 to 3,500 per sft of cabinet face | A cabinet measurement, not the room’s floor area. Confirm how the supplier measures the work. |
Which square feet? Our home rates apply to the interior area measured on site: the rooms, kitchen and bathrooms inside the flat, excluding balconies and the building’s common areas. The deed or brochure area is usually larger, because it carries a share of the stair, lift and lobby, so a rate applied to the deed area and the same rate applied to the measured area are two different prices. Our proposals state the measured area and this basis in writing, which lets you compare two quotes on the same number.
Read our residential interior service for what a home appointment covers. Office fit-outs use an execution-only basis with design fees separate; the office interior cost guide covers that scope.
Home interior design cost in Bangladesh: Minimal, Standard and Exclusive
Use the three levels to describe the scope you want. Then price the actual BOQ.
Which level fits your flat?
Tap the level closest to what you want. Add your flat size and location in the message, and send the floor plan if you have it. We reply with a scope-based budget range, not a phone quote.
These bands are typical, not fixed packages. The final price comes from the BOQ for your actual plan, rooms and finishes.
Above BDT 3,000 per sft the budget is no longer set by the finish level alone. One statement piece can move the total: a large chandelier, a designer light fitting, a classic dining table, imported stone, or a feature wall built as a single piece of joinery. We price such items as separate lines in the BOQ, so the generic per sft band stays readable and each special element is decided on its own.

Low cost interior design in Bangladesh: where to save and where not to
Low cost interior design in Bangladesh works when priorities are clear. Keep useful existing furniture, reduce decorative ceilings and phase the non-essential work. Ask what has been removed from a lower quote. A saving only helps if the remaining scope still solves the household’s needs.
Electrical safety, moisture control, working clearances and service access. They are cheap to get right during the work and expensive to fix after you move in.
Want to know which band your flat falls into? Send the floor plan and the rooms you want to complete.
Interior design cost by flat size: 1,000 to 2,200 sft

As a simple calculation, a 1,400 sft flat multiplied by BDT 1,500 to 3,000 gives BDT 21 to 42 lakh. At the Standard level of BDT 2,000 to 2,500, the same flat gives BDT 28 to 35 lakh. These figures assume the same area basis as the rate. Work on selected rooms needs its own BOQ. For planning advice by flat size, read our apartment interior guide.
| Flat size | Minimal, BDT 1,500 to 2,000 per sft | Standard, BDT 2,000 to 2,500 per sft | Exclusive, BDT 2,500 to 3,000+ per sft |
|---|---|---|---|
| 1,000 sft | BDT 15 to 20 lakh | BDT 20 to 25 lakh | BDT 25 to 30 lakh and above |
| 1,200 sft | BDT 18 to 24 lakh | BDT 24 to 30 lakh | BDT 30 to 36 lakh and above |
| 1,400 sft | BDT 21 to 28 lakh | BDT 28 to 35 lakh | BDT 35 to 42 lakh and above |
| 1,800 sft | BDT 27 to 36 lakh | BDT 36 to 45 lakh | BDT 45 to 54 lakh and above |
| 2,200 sft | BDT 33 to 44 lakh | BDT 44 to 55 lakh | BDT 55 to 66 lakh and above |
Each row is the published band multiplied by the measured interior area. The agreed kitchen and wardrobe work is already included in the full-home scope and itemised in the same BOQ, so do not add it again. Add only items left out of the scope, or extra quantity or specification agreed separately, such as appliances, loose imported furniture or a statement piece.
Kitchen cabinets: check the unit before the rate
Kitchen cabinets can be a large part of a home budget. In a full-home project the agreed kitchen is already inside the per sft band above; the cabinet-face rate matters when a kitchen is priced on its own or upgraded. Our published cabinet rates vary with board and finish, and they are not rates for kitchen floor area. Ask whether a quotation measures cabinet faces, elevations or another stated basis. Confirm hardware and installation, and check the burner, hood, countertop, sink and other exclusions. Read the kitchen cabinet price guide.

What a fair quote should show
Ask for an itemised bill of quantities, or BOQ. Then check that it shows:
- Each item’s quantity, unit, specification and price.
- Board thickness, finish and hardware.
- The lighting scope.
- Supervision and handover responsibilities.
- Exclusions and variation terms.
- Payment stages.
Compare quotes against the same drawings and specification. A headline rate alone cannot show which offer gives better value.
Does interior cost change outside Dhaka?
Yes, it can. Local procurement, transport, labour, accommodation, supervision and access all move the final price. Do not treat the Dhaka benchmarks above as confirmed rates for every district. For a project elsewhere in Bangladesh, agree the site-visit arrangement and logistics before comparing proposals, and check material availability and delivery time for that location.
ইন্টেরিয়র ডিজাইন খরচ ২০২৬: সংক্ষেপে
ঢাকায় বাসার interior-এর জন্য Studio Archifiction-এর published range প্রতি sft BDT ১,৫০০ থেকে ৩,০০০, যেখানে design ও execution একসাথে ধরা হয়। Rate ধরা হয় site-এ মাপা interior area-র উপর, balcony আর building-এর common area বাদে। Minimal level BDT ১,৫০০ থেকে ২,০০০, Standard ২,০০০ থেকে ২,৫০০ এবং Exclusive ২,৫০০ থেকে ৩,০০০ বা তার বেশি। শুধু design-এর fee প্রতি sft BDT ৫০ থেকে ৮০, জটিল scope-এ ১০০ পর্যন্ত। এগুলো সাধারণ range, fixed package নয়; চূড়ান্ত খরচ ঠিক হয় BOQ দেখে। অফিসের fit-out খরচ আলাদা ভিত্তিতে হিসাব হয়; সেটির জন্য আমাদের office interior cost guide দেখুন।
Questions clients ask
How much is a design-only fee?
Our published design and documentation fee is BDT 50 to 80 per sft of measured interior area, rising to BDT 100 per sft for a detailed or complex interior scope. It covers space planning and furniture layouts, 3D views of the key spaces with options where the brief needs them, working drawings, cabinet and furniture details, material specifications and a detailed BOQ for the selected option. Key-stage site visits are set out in the proposal, and any additional visit is charged separately. The design stage usually runs about five weeks from brief to BOQ, in four steps: brief and measurement check, layout and zoning, 3D views with material direction, then working drawings and the BOQ. The written proposal states the measured area, the drawing list and the revision allowance.
How are the design fee and the interior execution paid?
The design fee is paid in three stages, each tied to an approval: an advance to start, a second payment when the layout and 3D views are approved, and the last with the working drawings and BOQ. Execution is a separate budget that follows the approved BOQ: 50 percent before site work starts, 40 percent at an agreed progress stage and the final 10 percent at handover. Site work starts only after the layout, materials and cost are approved.
Is the per sft rate on the flat’s deed area or the measured area?
On the measured interior area: the rooms, kitchen and bathrooms inside the flat, excluding balconies and the building’s common areas. The deed or brochure figure is usually larger because it includes a share of the stair, lift and lobby. Ask every firm which area its rate is applied to before you compare prices; our proposals state it in writing.
What is the interior design cost for a 1,200 sft flat in Dhaka?
Multiplying 1,200 sft by our published home range of BDT 1,500 to 3,000 per sft gives about BDT 18 to 36 lakh for design and execution together. At the Standard level, BDT 2,000 to 2,500 per sft, it comes to about BDT 24 to 30 lakh. Treat these as planning figures. The BOQ for your rooms and finishes sets the actual price.
Is design included in a turnkey rate?
Read the quotation. Our published home range combines design and execution for its agreed scope. The word turnkey does not guarantee the same inclusions in every proposal, so ask for the design fee, the execution scope and the exclusions to be stated clearly.
Why do two quotes for the same flat differ?
They may use different quantities, materials, hardware or exclusions. One may include kitchen work, lighting and supervision while another does not. Give both firms the same drawings and compare BOQ items line by line. Also check payment stages, variation approval and handover obligations before deciding which proposal offers better value.
Is the lowest price always the best value?
No. First check whether both prices solve the same brief. A smaller, well-defined scope can be sensible, while a cheap headline rate with essential work missing leads to later additions. Ask what is included, what can be phased and what must be finished before you move in.
What is the interior design price per sft in Bangladesh?
For a Dhaka home, our published range is BDT 1,500 to 3,000 per sft with design and execution together. Most families land in the Standard band of BDT 2,000 to 2,500 per sft. A design-only appointment is BDT 50 to 80 per sft, up to BDT 100 for a detailed or complex scope. Kitchen cabinets are priced separately per sft of cabinet face, at BDT 1,800 to 3,500. Outside Dhaka, transport, labour and supervision can move these figures.
বাংলাদেশে ইন্টেরিয়র ডিজাইন খরচ প্রতি sft কত?
ঢাকায় বাসার interior-এর জন্য আমাদের published range প্রতি sft BDT ১,৫০০ থেকে ৩,০০০, যেখানে design ও execution একসাথে ধরা হয়। বেশিরভাগ পরিবার Standard level বেছে নেন, প্রতি sft BDT ২,০০০ থেকে ২,৫০০। শুধু design fee প্রতি sft BDT ৫০ থেকে ৮০, জটিল scope-এ ১০০ পর্যন্ত। যেমন ১,৪০০ sft ফ্ল্যাটে Standard level-এ খরচ দাঁড়ায় প্রায় BDT ২৮ থেকে ৩৫ লাখ। চূড়ান্ত দাম ঠিক হয় আপনার রুম আর finish অনুযায়ী BOQ দেখে।
Want a budget you can actually plan with?
Send the floor plan, location, size and the rooms you want to complete. We will tell you which band your scope fits and what must be defined before a quotation.
- Floor plan, even a hand sketch
- Location and flat size in sft
- Rooms you want completed now, and later
- Furniture you plan to keep
Institute of Architects Bangladesh (IAB), member K-172. Architect-led practice in Dhaka since 2012: working drawings, BOQ and site supervision in house. Home rates verified September 2026. Figures are Studio Archifiction’s published references, not a market survey. Last reviewed 6 November 2026.